Getting the FPGA part number

To synthesize IP, you will need the precise target part number of the FPGA that the IP will run on.

At the time of writing, the processing system IP block names and FPGA part numbers for the two boards we target in the class are:

Board type	Processing System IP block	FPGA part number
RFSoC 4x2	zynq_ultra_ps_e_0	xczu48dr-ffvg1517-2-e
Pynq‑Z2	processing_system7_0	xc7z020clg400-1

Note: These identifiers may change depending on board revisions or Vivado updates.

To find the correct part number yourself:

1. Create a Vivado project and add the appropriate processing system IP block.
2. In the Vivado GUI, select Report → Report IP Status.
3. This opens the IP Status panel at the bottom.
4. In this panel, you can see both the processing system IP block name and the corresponding FPGA part number.